BS 3602-1-1987Specification for steel pipes and tubes for pressure purposes carbon and carbon manganese steel with specified elevated temperature properties
|
ID： |
864C5C0A28874AEE9D726BDDDA4D65C4 |
|
文件大小(MB)： |
0.24 |
|
页数： |
24 |
|
文件格式： |
|
|
日期： |
2013-6-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS 3602-1:,1987,Incorporating,Amendment No. 1,Steel pipes and,tubes for pressure,purposes: carbon and,carbon manganese,steel with specified,elevated temperature,properties —,Part 1: Specification for seamless and,electric resistance welded including,induction welded tubes,UDC 621.643.2–986:[669.14.018.4–462+669.15974.018.4–462]:621.774.2/.3,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 10:59:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS 3602-1:1987,This British Standard, having,been prepared under the,direction of the Iron and Steel,Standards Committee, was,published under the authority,of the Board of BSI and,comes into effect on,23 December 1987,. BSI 12-1998,First published November 1962,First revision September 1978,Second revision December 1987,The following BSI references,relate to the work on this,standard:,Committee reference ISM/73,Draft for comment 86/41035 DC,ISBN 0 580 16236 2,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted by the Iron and Steel,Standards Committee (ISM/-) to Technical Committee ISM/73, upon which the,following bodies were represented:,Associated Offices Technical Committee,BEAMA Ltd. (Power Generation Association),British Compressed Air Society,British Gas plc,British Steel Industry,Electricity Supply Industry in England and Wales,Engineering Equipment and Materials Users’ Association,High Pressure Pipework Consultative Committee,Lloyds Register of Shipping,Process Plant Association,Seamless Steel Tube Association,Water Tube Boilermakers’ Association,Welding Institute,Coopted members,The following bodies were also represented in the drafting of the standard,through sub-committees and panels:,British Fluid Power Association,British Forging Industry Association,British industrial Truck Association,British Welded Steel Tube Association,Confederation of British Industry,Energy Industries Council,Coopted member,Amendments issued since publication,Amd. No. Date of issue Comments,5889 March 1988 Indicated by a sideline in the margin.,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 10:59:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS 3602-1:1987,. BSI 12-1998 i,Contents,Page,Committees responsible Inside front cover,Foreword iii,1 Scope 1,2 Information to be supplied by the purchaser and options,to be documented 1,3 Designation 2,4 Manufacture of the steel 2,5 Manufacture of the product 2,6 Chemical analysis 2,7 Final supply condition 4,8 Mechanical properties 5,9 Visual inspection and appearance 5,10 Tolerances 6,11 Tests 7,12 Number, selection and preparation of samples and test pieces 7,13 Test methods 8,14 Retests 9,15 Test certificate 10,16 Protective coating 10,17 Marking 10,Appendix A Designation of steel tubes in BS 3602-1 and the,nearest equivalent steel numbers in ISO 2604-II and ISO 2604-III 11,Appendix B Dimensional limits of tubes in relation,to the method of manufacture 11,Appendix C Estimated average stress rupture values,taken from ISO/TR 7468 12,Appendix D Procedure for verification of elevated temperature values 13,Appendix E Eddy current testing of tubes for verification,of leak tightness 15,Appendix F Ultrasonic testing of tubes for the detection,of longitudinal imperfections 15,Figure 1 — Example of lower confidence lines (for steel grade 430) 14,Table 1 — Method of manufacture of tubes, reference and steel,grades applicable 2,Table 2 — Chemical composition and mechanical properties,at room temperature 3,Table 3 — Permitted deviations of the product analysis,from the specified ladle analysis 4,Table 4 — Tube manufacturing processes and final supply conditions 4,Table 5 — Minimum 0.2 % proof stress (Rp0.2) values,at elevated temperatures 5,Table 6 — Tests for test category 1 and test category 2 8,Table 7 — Flattening test constant C 9,Table 8 — Designations of steel tubes in BS 3602-1 and the,nearest equivalent steel numbers in ISO 2604-II and 2604-III 11,Table 9 — Dimensional limits of tubes in relation to the,method of manufacture 11,Table 10 — Estimated average stress rupture values 12,Table 11 — Parameters for lower confidence lines: steel,grades 360 and 430 13,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 10:59:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS 3602-1:1987,ii . BSI 12-1998,Page,Table 12 — Parameters for lower confidence lines: steel grade 500 Nb 13,Table 13 — Drill diameter sizes 14,Table 14 — Notch dimensions for method B 14,Table 15 — Reference notch dimensions and tolerances 15,Publications referred to in this standard I……
……